Jump to the main content

Search Budget Builds Daily

Tile Calculator: How Many Tiles and Boxes Do I Need?

Author: Published on

To find how many tiles you need, divide the area by the area one tile covers including its grout joint, add a waste allowance for cuts and breakage, and round up to whole boxes. Daltile advises rounding up to the next highest footage when working out how much tile to buy.

Tile calculator

Enter the area and the tile. Results update as you type and the numbers are saved in the page address so you can bookmark or share them. Nothing leaves your browser. Areas are in feet, tiles in inches.

Area and tile details

Use 1 for a single floor or wall.

1/8 in = 0.125. Use 0 to ignore the joint.

Our planning default. Raise it for diagonal, herringbone or many cuts.

Printed on the carton or product page.

Leave blank to skip the cost.

Tile you need

How the tile calculator works

The calculator finds the area, works out how much space one tile takes up including half of each surrounding grout joint, divides, adds your waste allowance and rounds up to whole boxes.

Tile quantity
area      = length × width × areas
per tile  = (tile width + joint) × (tile height + joint) ÷ 144   [sq ft]
tiles     = round up (area ÷ per tile × (1 + waste ÷ 100))
boxes     = round up (tiles ÷ tiles per box)
144
square inches in a square foot (12 in × 12 in)
joint
grout joint width in inches, added to both tile sides

Worked example

Given: a 10 ft × 8 ft floor; 12 × 12 in tiles; 1/8 in (0.125 in) joint; 10% waste allowance; 10 tiles per box.

  1. Area: 10 × 8 = 80 sq ft
  2. Area per tile with joint: 12.125 × 12.125 ÷ 144 = 1.0209 sq ft
  3. Tiles before waste: 80 ÷ 1.0209 = 78.36
  4. With 10% allowance: 78.36 × 1.10 = 86.19, round up to 87 tiles
  5. Boxes: 87 ÷ 10 = 8.7, round up to 9 boxes

Answer: Buy 9 boxes (90 tiles), which leaves 3 spare tiles beyond the 87 needed.

Assumptions and limits

  • Straight (grid) layouts with a uniform joint. Pattern cuts are covered only by your waste allowance.
  • The waste allowance and the joint width are your inputs; the 10% and 1/8 in starting values are planning defaults, not standards.
  • The tiles-per-box figure comes from the product you choose. Mosaic sheets count as one piece, so set the tile size to the sheet size.
  • Grout, thinset, backer board and trim are not included.
  • Prices are entirely your inputs; we publish none.

Questions and answers

How many tiles do I need for a 10 x 8 ft floor?

A 10 x 8 ft floor is 80 sq ft. With 12 x 12 in tiles and a 1/8 in joint, each tile covers about 1.02 sq ft, so you need about 78.4 tiles. A 10% allowance makes 87 tiles, and with 10 tiles per box that is 9 boxes (90 tiles).

How much extra tile should I buy?

The calculator starts with 10%, which is our planning default and not a standard. Cuts at the edges, breakage and a few spares for later repairs all use tile. Diagonal, herringbone and other patterns cut more tiles at the edges, and rooms with many corners or built-ins use more, so raise the figure for those layouts. Ask the supplier or your installer for a recommendation for your tile.

Does the grout joint change how many tiles I need?

Slightly. Each tile plus its share of the joint covers a little more than the tile alone, so you need fewer tiles. The calculator adds the joint width to the tile width and height. For large tiles with thin joints the change is small; for small tiles with wide joints it matters more. Set the joint to 0 to ignore it.

Why does the calculator round up to whole boxes?

Tile is sold by the box, and Daltile advises rounding up to the next highest footage. Ordering a little over is safer than running short. Check the number of tiles per box on the carton or product page.

How do I measure an irregular room?

Split it into rectangles, measure each, and add the areas. Use the number-of-areas field for identical rectangles, or run the calculator once per rectangle and add the boxes, rounding up once at the end if you can share boxes.

Does this include grout, thinset or backer board?

No. Grout and mortar coverage depends on the product, tile size and joint width, and is printed on the package. Use the coverage on the bag you buy. This tool counts tiles and boxes only.

Can I use metric sizes?

This calculator uses feet for the area and inches for the tile. Convert tile sizes first: 1 inch is 25.4 mm exactly (NIST), so a 300 mm tile is about 11.8 in and 1 square metre is about 10.76 sq ft.

What does it cost?

Tile prices vary widely and we do not publish any. Type the price per box into the optional field and the calculator multiplies it by the box count.

Our sources

  1. Daltile, Find the Right Tile Pattern for Any Surface (helpful hints) (daltile.com) Accessed 2026-11-13.
  2. NIST SP 811, Appendix B.8: conversion factors for units (inches to millimetres) (nist.gov) Accessed 2026-11-13.

Related reading