Drywall Calculator: How Many Sheets, Mud and Tape?
To find how much drywall you need, add up the wall area (room perimeter times height, minus doors and windows) and any ceiling area, divide by the area of one sheet (4 ft wide by 8, 10 or 12 ft long), add a waste allowance and round up. USG's published finishing rates are about 10 gallons of all purpose joint compound and 370 feet of paper tape per 1,000 sq ft of panels.
Drywall calculator
Enter your room. Results update as you type and the numbers are saved in the page address so you can bookmark or share them. Nothing leaves your browser. Sizes are in feet and US gallons.
How the drywall calculator works
The calculator finds the wall area, takes off the doors and windows, adds the ceiling if you ticked it, divides by the area of one sheet and adds your waste allowance. Finishing materials come from USG's published rates per 1,000 sq ft and use the finished area (one face layer, before waste).
wall area = 2 × (length + width) × height × rooms area = wall area − openings [+ ceiling: length × width × rooms] sheets = round up (area ÷ (4 × sheet length) × (1 + waste ÷ 100)) compound = 10 gal × area ÷ 1,000 (pails = round up (compound ÷ 4.5)) tape = 370 ft × area ÷ 1,000 (round up)
- sheet length
- 8, 10 or 12 ft; panels are 4 ft wide
- waste
- allowance in percent for offcuts and breakage
Worked example
Given: a 14 ft × 12 ft room; 8 ft walls; 1 door 3 ft × 7 ft; 2 windows 3 ft × 4 ft; ceiling included; 4 × 8 ft sheets; 10% waste allowance.
- Wall area:
2 × (14 + 12) × 8 = 416 sq ft - Openings:
1 × 21 + 2 × 12 = 45 sq ft - Net walls plus ceiling:
416 − 45 + 14 × 12 = 371 + 168 = 539 sq ft - Sheets before waste:
539 ÷ 32 = 16.84 - With 10% allowance:
16.84 × 1.10 = 18.53, round up to 19 sheets - Joint compound:
10 × 539 ÷ 1,000 = 5.39 gal, so 2 pails of 4.5 gal - Tape:
370 × 539 ÷ 1,000 = 199.4, so 200 ft
Answer: 19 sheets of 4 × 8 ft drywall (13 sheets if you use 4 × 12 ft), 2 pails of joint compound and about 200 ft of tape.
Published rates used
| Item | Rate | Source |
|---|---|---|
| All purpose joint compound | 10 gal per 1,000 sq ft of panels | Source 1 |
| Compound packaging | 4.5 gal pail or carton (3.5 gal cartons also exist) | Source 1 |
| Paper joint tape | 370 ft per 1,000 sq ft of panels | Source 2 |
| Panel width | 4 ft; lengths 8 to 16 ft | Source 3 |
| Screw spacing (maximum) | walls 16 in, ceilings 12 in on centre | Source 3 |
Rates are USG's for its own products. Other brands and heavy skim coats differ, so use the figure printed on your product.
Assumptions and limits
- Rectangular rooms with flat walls. For odd shapes, calculate each rectangle separately and add the sheets.
- One layer of drywall. For two layers, double the sheet count; finishing materials follow the face layer only.
- The waste allowance is a planning default. The result is the number of whole sheets to buy, not a cutting plan.
- Joint compound and tape rates are manufacturer averages for taping and finishing; actual use depends on skill, texture and the number of coats.
- Screws, corner bead, primer and texture are not counted. Fasteners follow the spacing in source 3.
- Prices are entirely your inputs. Manufacturer figures are as published on 2026-11-13.
Questions and answers
How many sheets of drywall do I need for a 12 x 12 room?
With 8 ft walls, a 12 x 12 ft room has 384 sq ft of wall before doors and windows. One 4 x 8 sheet covers 32 sq ft, so the walls alone are 12 sheets before waste. Add the 144 sq ft ceiling (4.5 sheets) and a waste allowance, then subtract any large openings. Enter your own measurements above for the exact count.
How big is a sheet of drywall?
Panels are 4 ft wide. USG lists lengths from 8 to 16 ft for its Sheetrock UltraLight panels, and 8, 10 and 12 ft are the usual choices for homes. A 4 x 8 sheet covers 32 sq ft, a 4 x 10 covers 40 sq ft and a 4 x 12 covers 48 sq ft. Longer sheets mean fewer seams to finish but are harder to carry and hang.
Should I subtract doors and windows?
You can. The calculator subtracts the doors and windows you enter. Many installers do not deduct small openings because the cut-out pieces are rarely usable and the edges need extra cuts, so leaving them at zero gives a safer, larger count. Measure your own openings and decide.
How much joint compound do I need?
USG states coverage of approximately 10 gallons of Sheetrock All Purpose Joint Compound per 1,000 sq ft of gypsum panels. The calculator applies that rate to the area you will finish and rounds up to whole 4.5 gallon pails. Rates are for an all purpose compound used for taping, filling and finishing; other products and heavy skim coating differ.
How much drywall tape do I need?
USG states coverage of approximately 370 feet of Sheetrock paper joint tape per 1,000 sq ft of panels. The calculator multiplies that by your area and rounds up to whole feet. Tape comes in rolls of several lengths, so buy the next roll size up.
How many drywall screws do I need?
This calculator does not count screws because the box label and the way you frame the room change the number. The spacing rule is published: USG lists 1-1/4 in Type W screws at a maximum of 16 in on centre on walls and 12 in on ceilings. Use that spacing and the screw count printed on the box to buy enough.
How much waste should I allow?
The calculator starts with 10%, which is our planning default and not a manufacturer figure. Rooms with many openings, odd angles or short wall runs create more offcuts. Set it from 0% upward.
What does it cost?
Prices vary by region, store, thickness and panel type, so we do not publish a price. Type the price per sheet and per pail from your local store into the optional fields and the calculator multiplies them by the quantities.
Our sources
- USG, Sheetrock Brand All Purpose Joint Compound submittal sheet (J1969): coverage and packaging (usg.com) Accessed 2026-11-13.
- USG, Sheetrock Brand Fast Finish Paper Joint Tape submittal sheet (J2160): coverage (usg.com) Accessed 2026-11-13.
- USG, Sheetrock Brand UltraLight Panels submittal sheet (WB2501): panel width, lengths and fastener spacing (usg.com) Accessed 2026-11-13.